Avigilon Access Control Manager - Avigilon Workflow Guide - Manual (Page 32)

28
12. On this page, you can configure these door attributes:
• Reader (entry and/or exit)
• REX (Request-to-exit button or bar)
• Door Contact
• Strike
If you have made selections in any of the six bottom fields, notice the pencil/edit icon,
, to the right of the Reader, Alt Reader, Door POS, Rex, and Strike pick lists.
This edit icon enables you to bring up and edit the properties for the specified device
as shown in this door example:
For more on the fields each of these pages contains, refer to the Access Control
Manager online help.
13. Click to save these settings.
Alt Reader
Select the option you require from the drop-down list. This identifies the
subpanel and reader number of a secondary reader. A secondary
reader is typically used for the secure side door or a biometric.
If you select a sub-panel, the appears to the right of this selection.
Click to bring up the edit page for this option.
REX #1
Select the option you require from the drop-down list. This identifies the
subpanel and input number connected to the first request-to-exit switch.
If you select a sub-panel, the appears to the right of this selection.
Click to bring up the edit page for this option.
REX #2
Select the option you require from the drop-down list. This identifies the
subpanel and output number connected to the second request-to-exit
switch.
If you select a sub-panel, the appears to the right of this selection.
Click to bring up the edit page for this option.
Click on the
appropriate button to
bring up the settings
for the specified input/
output device