Avigilon Access Control Manager - Avigilon Workflow Guide - Manual (Page 20)

16
12. Click to save your settings.
Once the previous settings have been saved, the system returns to the Panels Listing
page. You should see that the panel you created is online.
13. Click on the Panel name to get to Panel Edit screen with the Panel Status page displays.
14. On the Status page, click on the Firmware button like this example:
Partitions
From the window, select one or more partitions to which this
panel will be assigned.
Only those partitions presently defined by this system appear
in this list.
IP Address Enter the IP address of this panel.
Reply Timeout From the list, select the number of milliseconds this panel is
allowed to wait for a reply from the primary Access Control
Manager host.
Offline Timeout
From the list, select the number of milliseconds this panel can
remain offline (disconnected from the host) before the panel
attempts to contact an alternative host, if one exists.
Retries
From the list, select the number of retries allowed before this
panel stops polling the host and attempts to connect the
alternative host, if one is configured.
Poll Delay
Defines the number of milliseconds it is required for the panel
to wait between polls.
Click this button