Seed Hawk Raven 2010 - Manual (Page 66)

Chapter 3
56 Seed Hawk™ Viper Pro™ Installation & Operation Manual
The CAN Configuration Profile screen is displayed.
3.
To create a new CAN profile, touch the Create CAN Profile button below the list of available CAN profiles.
Note:
To load a previously saved CAN profile, skip to step 6.
4.
Use the on-screen keypad to enter the desired profile name.
Note:
The CAN profile name should refer to the specific seed and/or product being applied to help the
operator quickly select the correct profile for the current operation or application.
5.
Touch the OK button.
6.
Select the profile name from the list of available CAN profiles and touch the OK button. The Viper Pro will
apply the CANbus settings and send updates to the nodes connected to the CANbus system.