Seed Hawk Raven 2010 - Manual (Page 18)

Chapter 2
8 Seed Hawk™ Viper Pro™ Installation & Operation Manual
TABLE 1. Seed Hawk Viper Pro Tractor Mounted Components
Mounting and Installation
The following procedure will guide you through mounting the Viper Pro console and Switch Box and connecting
the required cables.
Mounting the Switch Box
Note:
The following instructions illustrate mounting the switch box below the Viper Pro console. The
mounting bracket (P/N 107-0171-847) also may be used to mount the switch box above the
console. Before tightening the mounting bracket, verify the bracket is in the desired orientation and
ensure the console and switch box will be clear of any moving elements within the machine cab.
To assemble the mounting bracket:
1.
First, mount two of the provided clamps to the mounting bracket using four flat head phillips screws.
Attach the clamp to the mounting bracket so that the recessed mounting holes and the clamp are on the
same side.
Qty. Part/Description Part Number
1 Manual, Seed Hawk ® Viper Pro 016-3001-003
1 Quick Reference Guide, Seed Hawk ® Viper Pro 016-0171-291
1 Console, Seed Hawk ® Viper Pro 063-0173-053
1 Switch Box, Seed Hawk ® 063-0173-036
1 Kit, Mounting Bracket 117-0171-181
1 Cable, Sectional Control Console 115-3001-011
1 Cable, Sectional Control Vehicle Power/CAN 115-3001-012
Recessed
Mounting
Holes
Mounting
Screws