Seed Hawk Raven 2010 - Manual (Page 26)

Chapter 2
16 Seed Hawk™ Viper Pro™ Installation & Operation Manual
4.
Once all points have been calibrated, touch in various areas of the screen to verify that the arrow appears in
the correct location.
Note:
This screen will only be displayed for 1 minute. A count down of time remaining is displayed on the
Cancel button. If the calibration is not accepted before 1 minute lapses, the calibration will be
discarded and Viper Pro will continue to start up with the previous touch screen calibration.
5.
Touch the Accept button to apply the recalibration and continue the Viper Pro start up sequence. Touching
the Cancel button discards the recalibration and the Viper Pro will start up with the previous touch screen
calibration.
Registering Your Viper Pro System
The Viper Pro must be registered if an optional feature activation key such as the Multi-Product VRA (P/N 077-
0171-152) or Weather Station (P/N 077-0180-030) will be activated. Activation keys are specific to each Viper
Pro console. Once activated, a purchased key may not be transferred to a different Viper Pro console.
Viper Pro Features
The following features are available for the Viper Pro system:
•
Multi-Product VRA
•
Weather Module
Multi-Product VRA
The Multi-Product VRA feature is only required for automatic variable rate control of more than one product on
the Viper Pro console. This feature allows the Viper Pro to automatically control product rates in reference to a
prescription map or maps.
Weather Module
The Viper Pro is capable of reading information from an external weather station and recording this information
into the Rbin file and Rbin report. See Appendix H, Weather Station, or contact your local Raven dealer for
more information.