Seed Hawk Raven 2010 - Manual (Page 116)

Chapter 4
106 Seed Hawk™ Viper Pro™ Installation & Operation Manual
Send Guidance Message
The Viper Pro guidance system is capable of working with the SmarTrax automated steering system. In order
for the Viper Pro to send guidance messages to the SmarTrax system, The Send Guidance Message option
must be selected.
Section Setup Wizard
The Seed Hawk Viper Pro must be configured for the specific vehicle and drill being used for seeding
applications. To ensure the best possible results, the Section Setup Wizard should be completed if any part of
the seeding system (i.e. tractor or drill) is changed.
Note:
If multiple tractors or drills may be used, be sure to save each profile with detailed profile names to
help identify specific profiles at a later date.
Setting up Sections
1.
Select Menu, Setup, and Sect. The Seeder Configuration screen displays.
2.
Select the tractor type that best describes the vehicle used to pull the seeder during actual seeding
operation. Select one of the following tractor types:
•
Conventional - Standard wheeled tractor with front wheel steering.
•
Tracked - Tractor with a set of continuous tracks instead of wheels.
•
Articulated - Tractor steered by articulating at a pivoting joint.
If the seed or air cart is pulled in front of the drill, select the Seed Cart in Front of Drill option.
3.
Touch the Next button in the lower right corner to advance to the selected tractor type setup screen.