Seed Hawk Raven 2010 - Manual (Page 37)

3
Manual No. 016-3001-003 27
CAN (Controller Area Network) Setup
Miscellaneous Settings Area
The following readings and settings are displayed in the Miscellaneous area:
• Speed Sensor/Source
• Speed Cal
• Self Test
• Packing Pressure or Pump RPM
• Speed (Display only)
• Units
The Miscellaneous area on the CAN Controller Status screen displays an overview of the selections and
settings accessible by touching within the Miscellaneous area.
Speed Display
Speed is a display only. The Speed read out displays the current ground speed of the vehicle or the entered
Self Test Speed. See the Using the Calibration Assistance: section on page 29 for information on entering and
using a Self Test Speed.
Note:
The speed display on the Viper Pro and the vehicle speedometer may display different values
during an application, especially if a gear tooth speed sensor mounted on the air cart is used to
determine application speeds.