Seed Hawk Raven 2010 - Manual (Page 192)

Chapter 10
182 Seed Hawk™ Viper Pro™ Installation & Operation Manual
Enabling Manual Console Display
If an Rbin file has been created with Viper in the Manual Console mode, the standard Rbin report will not
display any coverage map as no coverage has been reported to the Rbin report. The Manual Console Display
allows you to view the areas of the field that were recorded with the “Section On”.
To Enable Manual Console Display
1.
Open the Rbin Viewer.
2.
Select a file to be viewed.
3.
Select Options from the Rbin drop down menu.
4.
Select Manual Console Display. The coverage map will now show what parts of the field were recorded
with the “Section On”.
Export Settings
The Export Settings feature allows you to modify how the Rbin report is displayed. Two setting options are
available.
• Show Zero-Rate
• Filter Overlap
Show Zero Rate -
When the ‘Show Zero Rate’ option is unchecked, the Rbin report will show only those areas
that have product applied to them. If the ‘Show Zero Rate’ option is checked, any area that is driven over will
be shown whether product was applied or not.
Filter Overlap -
When making sharp turns, portions of a section may actually swing backward over pre-applied
areas. This will result in small areas of the field being shown as being covered twice in the shapefiles and in the
total acreage calculation. When ‘Filter Overlap’ is unchecked, areas may show overlap due to sharp turns and
the acreage may be calculated slightly greater than the actual field acreage. With ‘Filter Overlap’ checked,