Watlow EZwarePlus Programming - Manual (Page 64)

56 EZwarePlus Programming Manual
2. “Event”: This column indicates the following: 0 = Event triggered; 1 = Event acknowledged; 2 = Event
returns to normal.
“Category”: Indicates the event category.
“Date”: Indicates the date of the event (YYYY/MM/DD).
“Time”: Indicates the time of the event (HH:MM:SS)
“Message”: Indicates the Event/Alarm message.
 This is read only – the EasyConverter application does not allow any edits.
Viewing a Data Log File (*.dtl)
1. From the EasyConverter application, click File…Open and locate
the Data Log file (*.dtl). As the file is loaded,
the following popup window appears:
1010-1015, Rev. 03