Watlow EZwarePlus Programming - Manual (Page 203)

EZwarePlus Programming Manual 195
Hide when disabled: When this box is checked, the object is invisible on the screen until the designated bit is in the
enable state.
Disabled Enabled
Grayed label when disabled: When this box is checked, the object’s label is grayed out until the designated bit is in
the enable state.
Disabled Enabled
Enable when Bit is ON/Enable when Bit is OFF: Choose the state of the designated bit that will enable the action of
the object.
Sound
Enable the Sound option to play a sound when the object is activated.
The default sound is the HMI’s beep. For models equipped with an audio output jack, you can select other sounds
from the sound libraries to play when the object is activated.
1010-1015, Rev. 03