Watlow EZwarePlus Programming User Manual
Page 25
EZwarePlus Programming Manual
17
Changing or Restoring the HMI Settings by USB or SD
There may be times when it is necessary to change or update the settings in an HMI, when the IP address or password
of the HMI are unknown. EZwarePlus provides a tool to create a system settings file, and transfer that file to the HMI.
The following settings can be changed with the System Setting Editor:
Password
Local, Upload, Download, Upload History
General
HMI Name, Backlight Brightness, Time Offset (Time Zone Adjustment),
Portrait Mode (0, 90, 180, 270 degree rotation)
Network
Use DHCP, IP Address, Subnet Mask, Gateway, DNS
Clear History
Recipe, Data Log, Event Log, Operation Log
VNC Server
Enable, Stop VNC, Stop VNC, Start VNC Single Connection, Start VNC Multiple Connection
Download
Popup Download Window, Restart After Download/Upload
To open the System Settings Editor, use the Tools menu in EZwarePlus:
Once all the settings are made, click the Export button to save the data to a file.
1010-1015, Rev. 03