Watlow EZwarePlus Programming - Manual (Page 117)

EZwarePlus Programming Manual 109
General tab settings:
1. Fast selection button: The Attribute: drop-down enables or disables the fast selection button, which
is used to open the Fast Selection window (window number 3). The Settings button sets the look of
the button including shape and color. The Position drop-down sets the fast selection button on either
the lower left or lower right portion of the display. When checked, the Hide button when HMI starts
option causes the fast select button to be hidden when the HMI starts. Use Local Bit 9014 to control
the Fast Select button. Clear the bit to show the button and set the bit to hide it.
2. Screen Saver: The Back light saver sets the number of minutes (none-255) of inactivity after which
the backlight is turned off. If the value None is selected, then the back light saver is disabled.

The backlight is re-triggered when the screen is touched or when an alarm occurs (if the Enable
back light when alarm occurs option is selected).
Screen Saver sets the number of minutes (none-255) of inactivity after which the screen saver is
activated. If the value None is selected, then the screen saver is disabled.
Saver window no. designates the window that will be used as the screen saver.
1010-1015, Rev. 03