Watlow EZwarePlus Programming - Manual (Page 106)

98 EZwarePlus Programming Manual
1. From the Edit menu, select Window Process and click Window Copy.... The Window Copy dialog box
appears.
2. In the Source project box, specify the path to the project that contains the window screen(s) you
wish to copy. Use the Browse... button to navigate to the project if you are unsure of the
location or name of the project file.
3. In the Source boxes, enter the numbers of the window screen(s) you wish to copy. They must be
consecutive windows. If you are only copying one window, put the same window number in both
boxes.
4. In the Destination box, select the number of the window in the current project that you wish to copy
the selected window(s) to. If multiple windows are selected, they will be copied into consecutive
windows beginning with the one designated in the Destination window.
5. There are checkboxes for PLC control, Event (Alarm) log, Schedule, Data transfer, and Data sampling.
The selected options will also be copied into the current project.
6. Click OK. The EZwarePlus Destination window is redisplayed with the Window Copy command
executed.
 To delete a graphics object(s)
1. Select the object or objects you wish to delete.
2. Press the DELETE key or from the Edit menu, click Delete.
 You can restore the deleted object by using the Undo command.
 To move a graphics object(s)
1. Select the object or objects you wish to move.
2. When you place the mouse cursor over a highlighted object, the cursor changes to a crosshair. This
indicates that you are able to move the selected object. Move the object by clicking on it and
dragging the object to the proper position on the work area.
1010-1015, Rev. 03