Watlow EZwarePlus Programming - Manual (Page 166)

158 EZwarePlus Programming Manual
 To create a sample keypad entry screen:
1. Start a New project file in EZwarePlus.
2. From the Objects menu, select Numeric/ASCII > Numeric Input. The New Numeric Input Object Properties
box appears.
3. Create a Numeric Input Object with the following parameters:
Tab Section Parameter Value
General Description Numeric Input Object
Read Address PLC Name: Local HMI
Device Type: LW
Address: 0
Data Entry Keyboard
(Select Use a popup
keypad)
Window No. 60: ASCII Middle
Popup position Lower, right-hand column
Numeric Format Display Data Format 16-bit signed
Number of Digits Left of Decimal Pt. 5
4. Create an ASCII Input Object with the following parameters:
Tab Section Parameter Value
General Description ASCII Input Object
Read Address PLC Name: Local HMI
Device Type: LW
Address: 1
No. of words: 12
Data Entry Keyboard
(Select Use a popup
keypad)
Window No. 60. ASCII Middle
Popup position Lower, right-hand column
5. Create two text boxes; one to identify the Numeric Input register, and one to label the ASCII Input register.
Place the text boxes and the Numeric Input and ASCII Input objects near the top of the window.
1010-1015, Rev. 03