Watlow EZwarePlus Programming - Manual (Page 201)

EZwarePlus Programming Manual 193
To delete a user by Option List:
1. Create an Option List with User account selected for the Source of item data. Configure the Monitor
Address as ([Control Address] + 2).
2. Create a Set Word object, addressed to (Control Address), configured to write a constant value of 8.
3. When the project is run, select the desired User Name from the Option List, then touch the Set Word object.
Object Security
Many objects in EZwarePlus can be secured using the Security tab in the object’s properties window. For example, a
Function Key can be secured so that only user’s with a specified access class can operate the Function Key and open a
particular window.
User Restriction
The User restriction area is where the security class for the object is set.
Once an Object class is selected in the User restriction area, three options become available. With no option checked,
the object simply will not operate when touched unless a user with the correct access class is logged in.
1010-1015, Rev. 03