Watlow EZwarePlus Programming - Manual (Page 228)

220 EZwarePlus Programming Manual
The Upload from PLC and Download to PLC buttons are Data Transfer (Trigger-based) objects that transfer the recipe
data to and from the PLC. For Download to PLC, select the recipe in the Source address and select the PLC in the
Destination address (this is the beginning address where the recipe data will be written).
Important: When the recipe data has been edited in the Simulator, the changes are stored in the database file on the
PC (EZPlus > HMI_memory > Recipe > recipe.db). This database file must be downloaded to the HMI using Utility
Manager in order for the HMI to reflect the changes made in the recipe.
When the recipe data is edited in the HMI, the changes are stored in the database file in the HMI. The database file
must be uploaded from the HMI using Utility Manager and stored in the Recipe folder on the PC in order for the
EZwarePlus project to reflect the changes made in the recipe. The changes are reflected in the Recipe View object
when running the Simulator but not in the Recipe Records Library.
1010-1015, Rev. 03