Watlow ANAWIN 2 - Manual (Page 87)

Viewing Channels
AnaWin User’s Guide 8-3
FIGURE 8-3 Gauge Display
Channel Setup Jump
Click the Channel Setup Jump button to jump to the channel parameters
screen for the selected channel.
Bar Graph
Each gauge’s bar graph is centered on the setpoint of the corresponding
loop. The setpoint is indicated by the triangular symbol and highlighted
in blue. The level of the colored bar indicates the process variable value
graphically. The color of the bar indicates the value of the process
variable relative to the process alarm and deviation settings.
Control Mode
The Control Mode field displays the control mode for each loop: Auto,
Manual, or Tune.
Percent of Full Scale
Use the Percent of Full Scale field to set the scale displayed on the
gauges. Larger percentages produce gauges with less detail or
resolution. Smaller percentages produce gauges with greater resolution.
Previous Screen
Click Previous Screen to return to the bar graph display.
Channel Setup
Jump
Bar Graph
Control
Mode
Percent of Full Scale
Previous
Screen