Watlow ANAWIN 2 - Manual (Page 51)

Setting Channel Parameters
AnaWin User’s Guide 5-11
Jump
Select Jump from the menu bar to display the Jump to Ramp-Soak
Functions window, shown in Figure 5-15. From this screen, you can
jump to a different segment or modify the time remaining in the current
segment.
FIGURE 5-15 Jump to Ramp-Soak Functions Window
To jump to a different segment, follow these steps:
1. Click Select Channels to display a pull-down list box from which
you can select the channels you want to jump to a different seg-
ment.
2. From the list box, select the desired channels, then click OK to
return to the Jump to Ramp-Soak Segment window.
3. Enter the segment number for the segment to which you want to
jump in the Advance to segment field.
4. Click Download to jump to the specified segment and return to the
Special Ramp-Soak Functions window.
To modify the time remaining for the segment that is currently running
on the selected loop, follow these steps:
1. Use the Time remaining in segment fields to modify the time
remaining.
2. Enter current segment number in the Advance to segment field.
3. Click Download to download your modification and return to the
Special Ramp-Soak Functions window.
Status
Use the Status column to specify whether a profile is Assigned or Not
Assigned to the loop. An Assigned loop operates as a ramp/soak loop. A
Not Assigned loop operates as a standard control loop. Refer to “Profile
Name,” earlier in this section, for details about how to associate a
profile with a loop.