Watlow ANAWIN 2 - Manual (Page 34)

4-6 AnaWin User’s Guide
Setting System Parameters
You can set password protection by user Level (operator, supervisor,
engineer, or none), or by specific User.
• Level: Select Level to divide password protection between Operator,
Engineer, Supervisor, or None user levels.
• User: Select User to set up passwords for users by name. If you
select the User option, you must assign a user level and password to
each user. Do this in the User Information section of the screen as
described under “Setting Passwords by Level,” later in this chapter.
NOTE
If you misplace or forget the Supervisor password, call Technical
Support for a one-day only master password.
Setting Passwords by Level
If you select the Level option, you can set three passwords: Operator,
Engineer, or Supervisor. You can set access for each level in the
Password Level Required panel, as described below.
Password Level Required: The Password Level Required panel,
shown in Figure 4-7, allows you to assign access rights for user levels to
portions of AnaWin.
FIGURE 4-7 Password Level Required Panel
When you double-click All Menus, the AnaWin menu tree appears as
shown in Figure 4-8. Select the portions of the menu tree to password
protect. To enable password protection, highlight a menu item and click
the button corresponding to the user level. The None designator changes
to the selected user level.