Watlow ANAWIN 2 - Manual (Page 108)

10-14 AnaWin User’s Guide
Using the Developer
Editing Enabled: Use the Editing Enabled pull-down list box to
specify whether the reference is read-only (False) or user-editable
(True). Inputs and global outputs are not editable.
Image When Hi: Click the Image When Hi setting to display a dialog
box from which you can select a graphic (by file name) to be displayed
when the I/O point is high.
Image When Lo: Click the Image When Lo setting to display a dialog
box from which you can select a graphic (by file name) to be displayed
when the I/O point is low.
Top Position: Use this field to enter the top position (the number of
pixels from the top of the screen, under the toolbar) for the digital I/O
image on the custom overview screen.
Left Position: Use this field to enter the left position (the number of
pixels from the left of the screen) for the digital I/O image on the custom
overview screen.
Graphic Properties
Use the Graphic Properties table, shown in Figure 10-11, to specify an
image to be added to your custom overview screen.
FIGURE 10-11 Graphic Properties Table
You can set the following graphic properties:
Graphic Image: Click the Graphic Image setting to display a dialog
box from which you can select an image to add to your custom overview
screen.
Top Position: Use this field to enter the top position (the number of
pixels from the top of the screen, under the toolbar) for the graphic on
the custom overview screen.
Left Position: Use this field to enter the left position (the number of
pixels from the left of the screen) for the graphic on the custom
overview screen.