Watlow ANAWIN 2 - Manual (Page 25)

Exporting Data
AnaWin User’s Guide 3-3
Logging interval
The logging interval is the span of time (in seconds) for the data points
to be exported. The default value is 5, meaning that exported data
represents the state of the process variables every five seconds between
the starting and ending points. Increase or decrease the Logging Interval
by entering a new value and pressing Enter. If you do not press Enter,
the old value will re-appear.
Export file
The Export File field lists the file name for the default text file. The
default file name consists of the date, expressed in 6 figures, and the
suffix TXT.
Select File
Click the Select button to set the name and location of the file to be
created when data is exported. The data you have selected is saved in
the file you indicate. Figure 3-2 shows a sample exported data file.
FIGURE 3-2 Exported Data File Sample
Select Channels to Export
The data export file can include all the channels in the system, or only
some of them, according to your needs. Use the Select Channels button
in the Select Channels to Export panel, to select the channels you wish
to export.
Press the Select Channels button to select the channels you wish to
export.
Date Time Setpoint Process Variable Output1 Output2 Channel Name