Watlow ANAWIN 2 - Manual (Page 50)

5-10 AnaWin User’s Guide
Setting Channel Parameters
.
FIGURE 5-13 Special Ramp-Soak Functions Window
The menus on the Special Ramp-Soak Functions window allow you to
synchronize loops, modify segment times, and jump to other segments.
When you are done using these menus, click Done from the Special
Ramp-Soak Functions window to return.
Synchronize
Select Loops from the Synchronize menu to display the Channel
Synchronization Setup window, shown in Figure 5-14, which allows
you to synchronize loops.
FIGURE 5-14 Channel Synchronization Setup Window
To synchronize loops, follow these steps:
1. Click Select Channels to display a pull-down list box from which
you can select the channels you want to synchronize.
2. From the list box, select the desired channels, then click OK to
return to the Channel Synchronization Setup window.
3. Use the Ramp-Soak mode to be downloaded pull-down list box to
select the mode you want to download for the selected channels.
4. Click Download to download the selected mode for the selected
channels and return to the Special Ramp-Soak Functions window.