Maple Systems HMI5000 Series - Manual (Page 99)

Using EZware-5000 93
1010-1007, Rev. 10
To configure Security tab settings:
The Security tab is used to set up a table of users, user levels (access classes), and passwords. Up to 12 users can be
individually enabled, and each has a unique password and combination of any six access classes (A-F). Only numbers
are allowed for password.
When an object is created, it can be assigned an access class (A-F). When that object is activated (for example, a
button is touched), the HMI compares the access classes allowed for the currently logged-in user to the access class
specified for the object. If the access class of the object is within the classes allowed, the object’s action is executed.
The access class for an object is configured in the User restriction section of the Security tab for that object. So, for
example, if you wish to set the access class for a set bit object, click on the Security tab of that object’s properties
dialog, as shown below: