Maple Systems HMI5000 Series - Manual (Page 104)

98 EZware5000 Series Programming Manual
1010-1007, Rev. 10
To configure Printer/Backup Server tab settings:
1. Check the Use Remote Printer/Backup Server checkbox to enable the HMI to print to a printer connected to
a PC on the network.
 The EasyPrinter utility (included with EZware-5000 and accessible through Project Manager) must be
running on the PC with the network printer connected.
2. In the Output settings section, select page layout (horizontal or vertical), print area size, and margins.
3. In the Communications settings section, set the settings for the PC hosting the printer.