Maple Systems HMI5000 Series - Manual (Page 118)

112 EZware5000 Series Programming Manual
1010-1007, Rev. 10
EasyAddressViewer
Starts the Easy Address Viewer application for viewing the device types and memory ranges for the selected
communications driver.
Build Download Data for CF/USB Disk
Data can be downloaded to the HMI5000 Series using CompactFlash (older HMI models only), SD card, and USB flash
drives. The Build Download Data function builds the data files to do this.
To build download data for CompactFlash (CF), SD card, or USB jump drive:
1. Start Project Manager.
2. Click Build Download Data for CF/USB Disk… The Project Manager dialog appears.
3. Insert CF card, SD card, or USB flash drive into PC. Note the drive that represents the USB/CF/SD device.
4. Click Browse... next to Select the folder to save download data: to select the drive that represents the
USB/CF/SD device.
5. Check the boxes that will be the sources for your data and browse to the appropriate file for that source.
Click Build.
Transfer Settings
Download
Sends a compiled project file stored on the computer to the HMI.
Upload
Receives a compiled project file from the HMI to be stored on the computer.
Simulation Settings
On-line Simulation
Opens a compiled project (*.xob) in on-line simulator mode.