Maple Systems HMI5000 Series - Manual (Page 18)

12 EZware5000 Series Programming Manual
1010-1007, Rev. 10
15. Click the VNC server setting tab to enable remote access using VNC (Virtual Network Computing).
Click Start VNC to enable the VNC server.
Click the VNC login password to enter the password used to login to the HMI with a remote VNC viewer. The
default password is 111111.
Click Apply and then click OK to save the settings and exit the System Settings window.
 The VNC option is only available on Ethernet-equipped models.
16. Click on the Misc(ellaneous) tab to display the Backlight dialog. The Brightness control adjusts the brightness
of the HMI’s backlight. Use the mouse or touchscreen to roll the wheel. Rolling to the left decreases the
brightness, rolling to the right increases the brightness.
 System tags “Backlight Up (LB9040),” “Backlight Down (LB9041),” and “Backlight Index (LW9040)” can be
used to adjust the brightness at runtime.