Maple Systems HMI5000 Series User Manual
Page 16
10
EZware5000 Series Programming Manual
1010-1007, Rev. 10
10. Configure your password settings.
Local Password
The password required to enter local setup.
Upload Password The password required to upload data from the HMI to a PC or memory module.
Download
Password
The password required to download data to the HMI from a PC or memory module.
Upload (History)
Password
The password required to upload history files from the HMI to a PC or
memory module.
11. The new password must be entered, and then entered again to confirm. As the password is entered into the
confirm field, an indicator will show if the two passwords match.
12. Click on the History tab to display the History dialog. This is where data stored in the HMI can be cleared.
This will not clear data stored on an SD card or USB flash drive.
Clear Recipe
The HMI’s stored recipe data will be cleared when the Clear button is clicked.
Clear Eventlog The HMI’s stored event log data will be cleared when the Clear button is clicked.
Clear Datalog
The HMI’s stored data log data will be cleared when the Clear button is clicked.