Vanguard Tri-Phase - Manual (Page 92)

TRI-PHASE OPERATING™ INSTRUCTIONS
92
17.2 Test Plan Menu
1.LOAD TEST PLAN .
2.UNLOAD TEST PLAN
3.PLAN DIRECTORY
4.PRINT TEST PLAN
5.ERASE TEST PLAN
6.SAVE TEST PLAN
Figure 60.0 Test Plan Menu
a. Description: Allows the operator to select various test plan options.
b. Origin: From the “Main Menu” (Figure 14.0) select menu option 3.
c. Action Options: Press key number 1 or push down on the Control Knob to select the
“Load Test Plan” status display. Press key number 2 to select the “Unload Test Plan” status
display. Press key number 3 to print the test plan directory. The printing of the test plan
directory commences immediately after this selection is made. Press key number 4 to select
the “Print Test Plan Menu”. Press key number 5 to select the “Erase Test Plan Menu”. Press
key number 6 to select the “Save Test Plan” status display. Selection of 2, 3, 4, 5 or 6 may
be made by turning the Control Knob to the desired number and pushing down the Control
Knob after it is selected.
d. Action To Perform: Select menu option 1 for this example.