Vanguard Tri-Phase - Manual (Page 134)

TRI-PHASE OPERATING™ INSTRUCTIONS
134
25.14 Erase Thumb Drive Test Plan Status Displays
ERASE THUMB DRIVE TP
PLAN_
ERASE THUMB DRIVE TP
PLAN_###
Figure 90.0 Erase Thumb Drive Test Plan Status Displays
a. Description: Allows the operator to enter a thumb drive test plan number to be erased.
b. Origin: This menu is displayed after the operator selects 1 (“Erase Internal Tp”) from the
“Erase Test Plan With Thumb Drive Menu” (Figure 89.0).
c. Action Options: Enter the test plan to erase from the thumb drive using key numbers 0
through 9. Press the “CLEAR” key to enter another number. Press the “ENTER” key or
push down the Control Knob to confirm.
d. Status Displays: The top status displays first. The bottom status display indicates the test
plan number entered by the operator.