1 enter date status display, Enter date status display, Figure 74.0 – Vanguard Tri-Phase User Manual
Page 116
TRI-PHASE OPERATING™ INSTRUCTIONS
116
21.1 Enter Date Status Display
ENTER DATE
MM-DD-YY
Figure 74.0 Enter Date Status Display
a. Description: The date is stored in a battery powered volatile memory. The time and date
are displayed on the lower portion of the LCD when the TRI-PHASE™ is operational.
b. Origin: From the “Start Up Menu”, press key number 6. Selection of number 6 may be
made by turning the Control Knob. Push down the Control Knob after number 6 is selected.
c. Action To Perform: Enter month, day, year using key numbers 0 through 9. The date
format is MM-DD-YY.
NOTES:
The “Enter Time” status is displayed immediately after entering the last digit of the year from the
“Enter Date” status display.
“CLEAR” cannot be used to revise incorrect data entry.
If incorrect data entry is made, press the “STOP” key and start over.
- Resistor Transducer Adapter 9095-UC (7 pages)
- Accu-Ohm 200 S2 (4 pages)
- Accu-Trans (28 pages)
- ATO-400 (43 pages)
- ATO-400P (44 pages)
- Auto-Ohm (22 pages)
- Auto-Ohm 100_200 s2 (31 pages)
- Auto‐Ohm 200 S3 (66 pages)
- DMOM-100 (35 pages)
- DMOM-100_200 s2 (42 pages)
- DMOM-200 (33 pages)
- Herculito (17 pages)
- ATRT-01 S2 (59 pages)
- ATRT-01_01B S3 (88 pages)
- ATRT-01_01B_01D (31 pages)
- ATRT-03_03A (114 pages)
- ATRT-03_03A S2 (147 pages)
- CVT-765 (46 pages)
- CBCT (14 pages)
- CBPS-300 (16 pages)
- CT-3500 (24 pages)
- CT-3500 S2 (53 pages)
- CT-6500 (69 pages)
- CT-6500 S2 (82 pages)
- CT-7000 (83 pages)
- CT-7000 S2 (108 pages)
- CT-7000 S3 (137 pages)
- CT-7500 (76 pages)
- CT-7500 S2 (110 pages)
- CT-8000 (120 pages)
- CT-8000 S3 (145 pages)
- DigiTMR (86 pages)
- DigiTMR S2 (123 pages)
- DigiTMR S2 PC (31 pages)
- MCCB-250 (17 pages)
- UPS S2 (13 pages)
- EZCT-2000 (68 pages)
- EZCT-2000 (45 pages)
- EZCT-2000A (103 pages)
- EZCT-2000B (118 pages)
- EZCT-2000C Plus (119 pages)
- EZCT-S2 (66 pages)
- EZCT-S2A (98 pages)
- IRM-5000P (58 pages)