Vanguard Tri-Phase - Manual (Page 117)

TRI-PHASE OPERATING™ INSTRUCTIONS
117
21.2 Enter Time Status Display
ENTER TIME
HH-MM-SS
Figure 75.0 Enter Time Status Display
a. Description: The time is stored in a battery powered volatile memory. The time and date
are displayed on the lower portion of the LCD when the TRI-PHASE™ is operational.
b. Origin: Immediately after entering the last digit of the date from step c of section 21.1.
c. Action To Perform: Immediately after entering the last digit of the date, enter hours,
minutes, and seconds using key numbers 0 through 9. The 24 hour time format is
HH-MM-SS.
NOTES:
The “Main Menu” is displayed immediately after entering the last digit of the seconds from the
“Enter Time” status display.
“CLEAR” cannot be used to revise incorrect data entry.
If incorrect data entry is made, press the “STOP” key and start over.