Vanguard Tri-Phase - Manual (Page 61)

TRI-PHASE OPERATING™ INSTRUCTIONS
61
16.2 Setup Menu
1.RECORD ID .
2.TEST VOLTAGE
3.TEST FREQUENCY
4.PRINT RECORD
5.SAVE/RESTORE RECORD
6.SET TIME
Figure 38.0 Setup Menu
a. Description: Allows the operator to select other operational features of the TRI-PHASE™
test device.
b. Origin: From the “Main Menu” (Figure 14.0) select menu option 2.
c. Action Options: Press key number 1 or push down on the Control Knob to select the
status displays for editing the record identification (ID) which is printed with each test
result or test record. Press key number 2 to select the “Test Voltage Menu”. Press key
number 3 to select the “Test Frequency Menu”. Press key number 4 to select the “Print
Record Menu” for printing the current test record. Press key number 5 to select the
“Save/Restore Record Menu”. Press key number 6 to display the status displays for editing
the time and date settings. Selection of 2, 3, 4, 5, or 6 may be made by turning the Control
Knob to the desired number and pushing down the Control Knob after it is selected.
d. Action To Perform: Restore record #41. Select menu option 5 for this example.