Vanguard Tri-Phase - Manual (Page 49)

TRI-PHASE OPERATING™ INSTRUCTIONS
49
13.18 Test Record Not Saved Menu
ARE YOU SURE?
DATA WILL BE LOST!
1.DO NOT SAVE RECORD
2.SAVE RECORD
Figure 35.0 Test Record Not Saved Menu
a. Description: This menu displays after the operator decides to not save the test results to a
test record.
b. Origin: Press key number 2 (“NO”) from the “Save This Record Menu” (Figure 32.0).
c. Action Options: Press key number 1 or push down the Control Knob to select not to save
the test results to a test record. Press key number 2 to save test results to a test record.
Selection of number 2 may be made by turning the Control Knob. Push down the Control
Knob after number 2 is selected.