Vanguard Tri-Phase - Manual (Page 64)

TRI-PHASE OPERATING™ INSTRUCTIONS
64
16.5 Restore Record Number Status Display
RESTORE RECORD
NUMBER:
Figure 41.0 Restore Record Number Status Display
a. Description: The operator enters the record number to restore.
b. Origin: From the “Restore Record Menu” (Figure 40.0) selection menu option 1.
c. Action Options: Enter the record number to restore by pressing on the key numbers 0
through 9 and pressing “ENTER” to confirm. When an incorrect number(s) is/are pressed,
then pressing “CLEAR” before pressing “ENTER” clears the number(s) displayed and
allows for another number to be keyed.
d. Action To Perform: Restore record #41. Press key number 4, then key number 1 (i.e., 41
displayed) then press “ENTER” for this example.
NOTE:
If test record 41 does not exist, then use any record number the operator chooses to restore.