Teledyne LeCroy Summit T3-8 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 92)

Teledyne LeCroy Recording Rules Events
80 Summit T3‐8 PCI Express Multi‐Lane Protocol Analyzer User Manual
5.19.2 Available Events Area
The Available Events area is in the left repository panel where you can park buttons that
you intend to use in the Main display area. The events in this panel do not affect the
recording. You can drag and drop events in the Main Display panel.
5.19.3 Main Display Area
The Main Display area is the right panel where you create trigger and filter conditions.
You create conditions by dragging buttons onto the Main display area from the Available
Events area. You then create additional conditions by right‐clicking a button and selecting
options from a pop‐up menu.
5.19.4 Recording Rules Buttons
The Recording Rules toolbar allows you to create and edit recording rules:
5.20 Recording Rules Events
There are five sets of Events that can configured and actions can be set for every Event.
TABLE 5.2: Recording Rules Toolbar Buttons
New Event. Opens a
drop‐down menu with a
list of events. Zoom in
Delete. Delete selected
event. Zoom out
Undo. Undoes last
action. Show/Hide Channels.
Shows/hides the
channel buttons.
Redo. Undoes last Undo
command. Show properties.
Opens the Properties
dialog for the selected
item.
TABLE 5.3: Events and Event Actions
Event Pre-Defined Event Actions
Link State
Enter Electrical Idle
Exit Electrical Idle