5 setting field colors – Teledyne LeCroy Summit T3-8 PCIe Multi-lane Protocol Analyzer User Manual User Manual
Page 168
Teledyne LeCroy
Specifying General Display Options
156
Summit T3‐8 PCI Express Multi‐Lane Protocol Analyzer User Manual
Figure 8.3: Display Options Dialog - Color/Format/Hiding Tab
8.2.5
Setting Field Colors
The Field Colors tab allows you to customize the colors associated with each field used in
the packet view.
You may experiment with this option to achieve a color combination that suits you.
Select or change the trigger color using the color buttons labeled ‐ Packet # and
+ Packet # (before and after trigger) found under the Packet# section of the Field Colors
window.
You select or change a color by clicking the appropriate color button. This action causes a
color palette to pop up. Select the desired color and press OK.
1. Click View > Set Display Options to open the Display Options dialog.
2. Select the Color/Format/Hiding property page (see
).
3. Under the Group and Colors column, click the plus symbol (+) next to the group you
want to reformat. The group expands to show the individual fields within the group.
Each field has a color, as shown below.