Teledyne LeCroy Summit T3-8 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 111)

Summit T3‐8 PCI Express Multi‐Lane Protocol Analyzer User Manual 99
Channel Teledyne LeCroy
5.23.3 Changing the Value of the Timer
To change the value of the timer:
1. Right‐click on the Timer.
2. Select Properties
3. Enter in values for the Timer in the fields provides in Secs, Millisecs, Microsecs and
Nanosecs on the Timer tab.
Figure 5.49: Setting the Timer Values
4. Click on the Actions tab and set the External and Internal Triggering, Sequencing and
Filtering options. You can label the timer.
5.23.4 Deleting a Timer
To delete a Timer
1. Right‐click on the Timer.
2. Select Delete This Event. The Timer will disappear from the event.
5.24 Channel
Every event has two channels, one upstream and the other downstream. You can use
both channels with any event. The channels are independent of each other. If both
channels are selected it is valid but no action occurs, and thus no timer and counter is
created.
Figure 5.50 on page 100 shows three events in the Global State, the first event is
on Channel Up and the 3rd event is on Channel Down.