Teledyne LeCroy Summit T3-8 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 178)

Teledyne LeCroy Color‐Coding of BitTracer Contents
166 Summit T3‐8 PCI Express Multi‐Lane Protocol Analyzer User Manual
 Right‐click to display a menu.
 Place the cursor over any given byte to display all byte formats (including an
LFSR value) in pop‐up list.
Note: Descrambled values can only be displayed after the first recorded skip ordered set. Data prior to
the skip is displayed in scrambled values, due to the unknown LFSR.
Note: For Binary Data Display Format, bits are shown in order of transmission on the bus.
9.6 Color-Coding of BitTracer Contents
To increase visual understanding of BitTracer displays, different symbol types have color‐
coding:
 Presence or non‐presence of a lane’s byte‐lock
 Idle data characters (D0.0)
 K codes
 Invalid 10b symbols
 Signal presence
 Background of the Markers Bar (see “Markers Bar” on page 167 )
(color coded according to traffic speed).
 All symbols of a TS1/TS2 ordered set
By default, these color selections match the standard color selections used in the
CATC Trace format. You can modify them in the Display Options menu, accessible from
the Main toolbar or the Setup menu.
9.7 Report and Analysis Windows
In the report windows, BitTracer mode provides several functions to analyze traffic:
 Statistical information
 Timing measurements
 Packet decoding
To activate/deactivate a report window, use Views > Windows (see Figure 9.3 on
page 167 ).