Teledyne LeCroy Summit T3-8 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 174)

Teledyne LeCroy Load a Previously Saved Display Options File
162 Summit T3‐8 PCI Express Multi‐Lane Protocol Analyzer User Manual
 ATA Payload Portion
 ATA CFIS Fields
 ATA RFIS Device to Host Fields
 ATA DSFIS Fields
 ATA PSFIS Fields
 ATA SDBFIS Fields.
8.3 Load a Previously Saved Display Options File
If you have previously saved Display Options, you can load them by opening the Display
Options dialog and clicking the Load button. A dialog opens to let you load a previously
saved display options file.
1. Click Load to use a previously defined display options file.
2. When you see the Open File pop‐up window, enter the name of the file you want to
load and click Open.
3. When the PETracer™ software returns you to the Recording Options menu, click OK
to activate the display options you selected.
8.4 Saving Display Options
If you have customized the Display Options and wish to save them, you can do so by
clicking the Save button, then entering a unique file name. The .opt extension is added by
default.
Setting the Defaults: Save the currently specified Display Options to the file name:
default.opt by clicking Save As Default. When the Analyzer software begins execution, it
automatically loads the default.opt file, if one exists.