Teledyne LeCroy Summit T3-8 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 60)

Teledyne LeCroy Analyzer Chat Window
48 Summit T3‐8 PCI Express Multi‐Lane Protocol Analyzer User Manual
4.16 Analyzer Chat Window
PETracer has a Chat window that allows you to communicate with users on remote host
machines. For Chat to work, two conditions must be met:
 The host machines must have PETracer software installed and running.
 The host machines must be listed in each other's Network Browse list. This
means that your host machine must have the remote host machine listed in its
Network Browse window and the remote host machine must have your host
machine listed in its Network Browse window.
Figure 4.14: Analyzer Network Dialog
If the above conditions are met, a Chat session is initiated by running the command:
View > Analyzer Network Chat Bar. The following dialog box opens.
Figure 4.15: Analyzer Network Chat Dialog
Enter some text, then press Send. The message is then broadcast to all host machines
listed in your network browse window. If a target host machine also lists your host
machine in its Network Browse window, then it can receive your message. When the
message arrives, the Chat window automatically opens.