Teledyne LeCroy Summit T3-8 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 44)

Teledyne LeCroy Using the Menus
32 Summit T3‐8 PCI Express Multi‐Lane Protocol Analyzer User Manual
4.5.5 Search Menu
Search Menu operations are only available when you are working with a CATC Trace file.
Traffic
Summary Details the number and types of packets that were transferred
during the recording. You can hide, save, send, text, print, and view.
Bus Utilization Opens a window with graphs of bus usage for the open CATC Trace.
Link Tracker Opens a window for displaying a detailed chronological view of
traffic. The window provides view and navigation options.
Data Flow Opens the Data Flow Window, providing a tabular view of
transactions and their payload.
Trace
Navigator Shows the Navigator bar for navigating a CATC Trace. Shows a
snapshot of the recording and allows you to adjust the memory
area for the view.
LTSSM Flow
Graph Shows a state diagram of bus activity. Also allows you to navigate
through the LTSSM, based on the current recording.
Packet Header Opens the Packet Header bar, showing the Packet Header
information as it would be viewed in the specification.
Packet Data/
View Data Opens the Data Window for the current packet or transaction, with
the options: Hide, Save, Hexadecimal, ASCII, Decimal, Binary,
MSB Format, LSB Format, Big Endian, and Little Endian. Format Line
allows you to enter the number of bytes, words, or dwords per line.
Configuration
Space Presents a list of Configuration Spaces. Clicking an item displays the
selected Configuration Space in a Configuration Table format.
Go to Trigger Repositions the display to show the first packet following the
trigger event.
Go to Selected
Packet Repositions the display to a specific packet, Link or Split transaction
of PCI Express protocol or NVME, PQI, AHCI protocol and ATA
command Transactions number.
Go to Packet Allows searching for specific link events packets or time.
Go to Time Repositions the display to specific timestamp.
Go to Marker Repositions the display to a previously marked packet, Link, Split,
NVME, PQI, AHCI or ATA command transactions.
Go to Packet Allows searching for specific link events: TLP Type, DLLP Type,
Ordered Set, Link Event, Traffic Class, DLLP Virtual Channel,
TLP Virtual Channel, Direction, Speed, Link Width, Requester ID,
Completer ID, Data Lengths, Errors.