Teledyne LeCroy Summit T3-8 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 147)

Summit T3‐8 PCI Express Multi‐Lane Protocol Analyzer User Manual 135
Go To Marker Teledyne LeCroy
7.6.4 Recording an Audio File
The audio quality supports voice attachment and is not designed for high‐quality audio
Playback of audio content is not limited and depends on the formats supported by the
installed playback engine.
Click the record icon and speak into the microphone to record an audio file.
Note: This functionality is disabled if a microphone is not installed.
7.6.5 Video Files Supported
The user can attach video clips to the trace file (“add to the marker”). The playback of the
Video clips is limited to the formats that are supported by the video codecs installed in
the system.
7.6.6 Attachment Types and Visualization
The markers are represented graphically by a yellow triangle at the top right of the
marked item and a red vertical bar at the left‐most cell of a packet as shown below.
A marker may comprise any number of attachments of any types.
7.6.7 Embedded Attachments to a Marker
Embedded files are attached to the item marked and transported with the trace. You can
embed the following types of files to a marker:
 Audio Files
 Video Files
 Image Files
 YouTube Files
 Web Pages
 Text Attachments
 Other Attachments
Attachments are embedded in the marker and saved in the trace file. Once attachments
are placed in a marker, the marker can then be presented to a user in a story structured
form. On opening the marker the window resembles the marker editing dialog.
Note:
The use of Audio and Video markers is limited to the file types supported on a user’s system.
CATC Walk has been tested with .mp3 and .wmv files, which are supported by Windows as
installed. If additional codecs are installed, they should also work, but it is the user’s
responsibility to choose formats that will work for whomever they intend to exchange CATC
Marked Cell