Teledyne LeCroy Summit T3-8 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 105)

Summit T3‐8 PCI Express Multi‐Lane Protocol Analyzer User Manual 93
Counter Teledyne LeCroy
Figure 5.44: Setting Global and Sequence State Counter Events
5.22.2 How to Increment or Reset a Counter
You can Increment or Reset counters in the Global State and in the Sequence State by
performing the following steps:
1. Open the Recording Rules page, select an event, and drag it to the Global State or
Sequence cells. For details on these steps ( see “Filter Out” on page 100 ).
2. Right‐click on an event and select Specify Actions > Increment Global Counter >
Global Counter 1 from the menu (see Figure 5.45 on page 94 ).