Teledyne LeCroy WavePro Automation Command - Manual (Page 653)

Automation Command and Query Reference Manual - Processor Reference
OutputProcess Enum
Values
Max
Min
Ratio
STANDARDDEVIATION
app.Measure.Px.Operator (ParamEngine = "StandardDeviation")
Cyclic Bool
If true, the calculation is limited to a whole number of cycles detected in the input.
Description
Cyclic Bool
TAA
app.Measure.Px.Operator (ParamEngine = "TAA")
Hysteresis Double
From 0 to 10 step 0.1 Range
Hysteresis Double
TAANEGATIVE
app.Measure.Px.Operator (ParamEngine = "TAANegative")
Hysteresis Double
From 0 to 10 step 0.1 Range
Hysteresis Double
TAAPOSITIVE
app.Measure.Px.Operator (ParamEngine = "TAAPositive")
Hysteresis Double
Hysteresis Double
2-154
918501 RevA