Teledyne LeCroy WavePro Automation Command - Manual (Page 647)

Automation Command and Query Reference Manual - Processor Reference
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
app.Measure.MeasureMode = "MyMeasure"
app.Measure.P1.ParamEngine = "Setup"
Example
ClockFindLevel Action
Causes the engine to find a suitable level for either ClockLevells ("Absolute"or "Percent")
Description
ClockHysteresis Double
From 0 to 10 step 0.1 Range
Using ParamEngine = "Setup", please refer to the corresponding variable for the Hold Time parameter.
Description
ClockLevelIs Enum
Sets/Queries whether the Clock signal levels are specified in "Percent" or "Absolute"
Description
Values
Absolute
Percent
PercentGNDMax
PercentGNDMin
PercentPkPk
ClockPctLevel Double
From 0 to 100 step 1 Range
Using ParamEngine = "Setup", please refer to the corresponding variable for the Hold Time parameter.
Description
ClockSlope Enum
Sets/Queries the polarity of transitions of the Clock signal are used
Description
Values
Both
Neg
Pos
DataPctLevel Double
DataSlope Enum
Summary String
2-148
918501 RevA