Teledyne LeCroy WavePro Automation Command - Manual (Page 210)

Automation Command and Query Reference Manual - Control Reference
ProbeName1 String
Any number of characters Range
Reflects the name of the probe detected on Channel 1. Contains the text 'No Probe', if no probe is
sensed.
Description
ProbeName2 String
Any number of characters Range
Reflects the name of the probe detected on Channel 2. Contains the text 'No Probe', if no probe is
sensed.
Description
ProbeName3 String
Any number of characters Range
Reflects the name of the probe detected on Channel 3. Contains the text 'No Probe', if no probe is
sensed.
Description
ProbeName4 String
Any number of characters Range
Reflects the name of the probe detected on Channel 4. Contains the text 'No Probe', if no probe is
sensed.
Description
ProbeName5 String
Any number of characters Range
RecallCalSetup Action
Whenever a probe calibration is applied, the scope saves the information in a file on the disk. If the
scope must be rebooted for any reason, the probe calibration information is always cleared, but can
be recalled using this control.
Description
RiseTime1 Double
From 0 to 2e-009 step 1e-012 Range
When probes are deskewed, this control is set to the measured risetime of Channel 1.
Description
RiseTime2 Double
From 0 to 2e-009 step 1e-012 Range
When probes are deskewed, this control is set to the measured risetime of Channel 2.
Description
1-196
918501 RevA