Teledyne LeCroy WavePro Automation Command - Manual (Page 586)

Automation Command and Query Reference Manual - Processor Reference
FindLevel1 Action
When in absolute level mode, finds the absolute level at 50% on the first trace
Description
FindLevel2 Action
When in absolute level mode, finds the absolute level at 50% on the second trace
Description
Hysteresis1 Double
From 0 to 10 step 0.1 Range
Hysteresis in divisions around the level on first trace. The signal must enter the hysteresis zone
(shown as a cursor) on one side and exit from the other side to qualify a transition.
Description
Hysteresis2 Double
From 0 to 10 step 0.1 Range
Hysteresis in divisions around the level on second trace. The signal must enter the hysteresis zone
(shown as a cursor) on one side and exit from the other side to qualify a transition.
Description
LevelType1 Enum
Type of level on first trace: absolute/percent and %Pkpk, %0-Min, %0-Max with EMC option
Description
Values
Absolute
Percent
PercentGNDMax
PercentGNDMin
PercentPkPk
Hysteresis1 Double
Hysteresis2 Double
LevelType1 Enum
LevelType2 Enum
PercentLevel1 Double
PercentLevel2 Double
Slope1 Enum
Slope2 Enum
2-87
918501 RevA