Teledyne LeCroy WavePro Automation Command - Manual (Page 342)

Automation Command and Query Reference Manual - Control Reference
HorPos Double
From -0.5 to 0.5 step (8 digits) Range
Horizontal Position of the trace, normalized to a value between -0.5 and 0.5. A value of zero is the
default, and indicates no position change relative to the source trace.
Description
HorZoom Double
From 0.1 to 1e+006 step (8 digits) Range
Horizontal Zoom setting. Locked to a 1, 2, 5 sequence unless VariableHorZoom is set to True .
Description
ResetZoom Action
Resets the zoom settings to their default values.
Description
VariableHorZoom Bool
Enable/Disable the variable Horizontal Zoom control. If enabled, the HorZoom control may be set to a
value other than the standard 1, 2, 5 sequence.
Description
VariableVerZoom Bool
Enable/Disable the variable Vertical Zoom control. If enabled, the VerZoom control may be set to a
value other than the standard 1, 2, 5 sequence.
Description
VerPos Double
From -1.5 to 1.5 step (8 digits) Range
Vertical Position of the trace, normalized to a value between -1.5 and 1.5. A value of zero is the
default, and indicates no position change relative to the source trace.
Description
VerZoom Double
From 0.1 to 100 step (8 digits) Range
Vertical Zoom setting. Locked to a 1, 2, 5 sequence unless VariableVerZoom is set to True .
Description
HorZoom Double
ResetZoom Action
VariableHorZoom Bool
VariableVerZoom Bool
VerPos Double
VerZoom Double
RJBUJSPECT app.SDA2.JitterMeasure.Spectrum.RjBUjSpect
1-328
918501 RevA