Teledyne LeCroy WavePro Automation Command - Manual (Page 604)

Automation Command and Query Reference Manual - Processor Reference
Level Enum
Defines the level for which the standard deviation is computed, One or Zero.
Description
Values
One
Zero
EYESIGNALTONOISE
app.Measure.Px.Operator (ParamEngine = "EyeSignalToNoise")
Aperture Double
From 0 to 100 step 0.1 Range
For eye-diagram parameters which have an "aperture" setting, this defines the region over which the
eye digrams vertical information is analyzed.
It specifies the percentage of the central region of the eye (relative to 1 Unit Interval) which is used in
the analysis.
Description
Level Enum
Specifies if "noise" is to be determined from the one level, the zero level or both levels
Description
Values
Both
One
Zero
Aperture Double
Level Enum
EYESUPPRESSIONRATIO
app.Measure.Px.Operator (ParamEngine = "EyeSuppressionRatio")
Aperture Double
From 0 to 100 step 0.1 Range
For eye-diagram parameters which have an "aperture" setting, this defines the region over which the
Description
Aperture Double
Output Enum
2-105
918501 RevA