Teledyne LeCroy WavePro Automation Command - Manual (Page 650)

Automation Command and Query Reference Manual - Processor Reference
Clock1Slope Enum
Sets/Queries the polarity of transitions detected on Clock1
Description
Values
Both
Neg
Pos
Clock2FindLevel Action
Using ParamEngine = "Skew", please refer to the corresponding variable for the Hold Time parameter.
Description
Clock2Hysteresis Double
From 0 to 10 step 0.1 Range
Sets/Queries hysteresis for transition detection used for Clock1
Description
Clock2LevelIs Enum
Sets/Queries whether to use Percent or Absolute levels for Clock2
Description
Values
Absolute
Percent
PercentGNDMax
PercentGNDMin
PercentPkPk
Clock2PctLevel Double
From 0 to 100 step 1 Range
Sets/Queries the "Percent" of the amplitude of Clock2 to use for a transition level, if Clock2LevelIs =
"Percent"
Description
Clock2Slope Enum
Sets/Queries the polarity of transitions detected on Clock2
Description
Values
Both
Neg
Pos
2-151
918501 RevA